User's Manual & Application

User's Manual

TEPRA Lite LR30GS User's Manual

TEPRA Lite LR20E User's Manual

TEPRA Lite LR5E User's Manual

Kakumiru User's Manual



  1. 1.Operating Environment

    Before installing "TEPRA SPC10", make sure that your computer satisfies the following requirements.

    Operating System: Windows 10/ 8.1/ 8/ 7 (32bit/ 64bit)

    Hard Disk Space Which "TEPRA SPC10" Uses: Approx. 300MB

    Display: XGA (1024 x 768), High Color or higher

    SR970/SR950/SR750/SR-R680/SR670/SR550/SR530/SR3900P/SR3700P/SR3500P/WR1000/SR550C/SR530C/SR3900C - USB 1.1 Full-speed
    SR-R7900P/SR5900P - USB 2.0 Full-speed, Wired LAN (10/100BASE-TX), wireless LAN (IEEE 802. 11b/g/n)
    SR5500P - USB 1.1 Full-speed, Bluetooth

    • *"TEPRA SPC10" may not operate normally in computers upgraded to a later version of Windows.
      "TEPRA SPC10" may also not operate normally depending on the computer environment you use.
  2. 2.Installing The Application and The Printer Driver
    1. 1.Turn on your computer and start up Windows.
      Close running applications if any. Close any anti-virus software or similar also.
    2. 2.Download application "TEPRA SPC10" from the link below.
    3. 3.Save the downloaded file to the desktop. And after extracting the file, execute the Setup.exe file in the documentation to install it. An install program starts up.
    4. 4.When the installation screen appears, confirm the content and click your choice.
      • *After the application installation is completed, the installer of printer driver will appear automatically.
    • *Do not connect the printer to your computer until the install window tells you to do so.
    • *Make sure to install "TEPRA SPC10" as a user with the administrator authority.
    • *Before installing the "TEPRA SPC10" application, close all the other applications running on your computer.
    • *When connecting two or more products to one computer:
      The printer driver is necessary for each product individually. Installation of the printer driver for the second or later products will start when the second (or later) product is first connected to the computer. Install it according to the instructions displayed on the screen. Newly installed printer drivers are named as copies of the printer driver.